Model NO.: YLJ89902
Surface Finishing: Anodic Oxidation
Alloying Ingredient: 6063
Certification: CE, ISO, RoHS
Max Length of Profile: 7.3meter
Min Thickness of Profile: 0.8mm
Color: Clear , Bronze, Champagne, Black
Max Film Um: 30
Trademark: Yonglijian
Transport Package: 1. Protective Film+ Kraft; 2. Protective Film+Foam
Specification: according to drawings
Origin: China
HS Code: 7604210000
Model NO.: YLJ89902
Surface Finishing: Anodic Oxidation
Alloying Ingredient: 6063
Certification: CE, ISO, RoHS
Max Length of Profile: 7.3meter
Min Thickness of Profile: 0.8mm
Color: Clear , Bronze, Champagne, Black
Max Film Um: 30
Trademark: Yonglijian
Transport Package: 1. Protective Film+ Kraft; 2. Protective Film+Foam
Specification: according to drawings
Origin: China
HS Code: 7604210000
China PVDF coating aluminum window extrusion profiles
Yonglijian aluminum installed a complete powder coating line for aluminium extrusions and aluminium profiles which include dip pre pre treatment plants, powder coating booths, pvdf paint booths, powder curing ovens, effluent treatment plant and dimineralising plant. Our PVDF spraying coating processing apply the Kynar500 or Hylar5000 as the basic material, or metal aluminum powder as pigment coating.The stability of the fluorocarbon coating and durability is 30 and 80 percentage points higher than the other normal powder coating.
1. Material: Aluminum alloy 6063 T5
2. Temper: T5 | Alloy | Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | Impurity | Al |
| 6063 | 0.2-0.6 | 0.35 | 0.1 | 0.1 | 0.45-0.9 | 0.1 | 0.1 | 0.1 | 0.15 | Rest |
| 6061 | 0.4-0.8 | 0.7 | 0.15-0.4 | 0.15 | 0.8-1.2 | 0.04-0.35 | 0.25 | 0.15 | 0.15 | Rest |
| 6060 | 0.3-0.6 | 0.1-0.3 | 0.1 | 0.1 | 0.35-0.6 | - | 0.15 | 0.1 | 0.15 | Rest |
| 6005 | 0.6-0.9 | 0.35 | 0.1 | 0.1 | 0.40-0.6 | 0.1 | 0.1 | 0.1 | 0.15 | Rest |
4. Profile Width: max 400mm
5. Profile thickness: 0.8mm/1mm/1.2mm/1.4mm/1.6/2mm,and per request
6. Advantage
A High wearing resistance
B. good impact resistance
C. Good fade resistance under hostile environment weather
D. Comply with AAMA605.02.90, BS6496, AS3715-1989, SABS
7. Application
Window and door section, Curtain Wall profile, industrial profile | Alloy | Temper | Tensile strength test | Hardness test |
| Thickness(mm) | Tensile strength RM(N/mm2) | Non-proportional stretching stress Rp0.2(N/mm2) | Stretching rate A50mm(%) | Pattern thickness(m) | HV | HW |
| 6061 | T4 | All | >=180 | >=110 | >=16 | - | - | - |
| T6 | All | >=265 | >=245 | >=8 | - | - | - |
| 6063 | T5 | All | >=160 | >=110 | >=8 | >=0.8 | >=58 | >=8 |
| T6 | All | >=205 | >=180 | >=8 | - | - | - |
| 6063A | T5 | <=10 | >=200 | >=160 | >=5 | >=0.8 | >=65 | >=10 |
| >10 | >=190 | >=150 | >=5 |
| T6 | <=10 | >=230 | >=190 | >=5 | - |
| >10 | >=220 | >=180 | >=4 |
Yonglijian Aluminum Co.,Ltd processes 30 years in designing ,production ,and exporting of aluminum die casting product for architectures including window ,door and glass wall system, stair handrail, garden fence, housing decoration supples.etc.
We own more than 20,000 die mold for different markets in different thickness and designs. Including aluminum molds for Nigeria, Canada, Australia, South America, chille, etc and never stop developing new die mold for global aluminum profile buyers.
Find no further than us for Aluminum alloy profiles in any alloy and temper and surface treatments.
Product range:
Raw Material:
1. aluminum alloy profile for window /door/industrial use/decoration purpose
2. Aluminum blank, flat bar, square tube, round pipes, groove, T profiles.
3. Aluminum heat sink, and aluminum profile for electricity alliance
Finished products:
2. Aluminum window and door
3. Glass curtain wall
4. Stair handrail/fence
5. Roof lantern
6. Aluminum shutter and Louvre
China PVDF coating aluminum window extrusion profiles
Yonglijian aluminum installed a complete powder coating line for aluminium extrusions and aluminium profiles which include dip pre pre treatment plants, powder coating booths, pvdf paint booths, powder curing ovens, effluent treatment plant and dimineralising plant. Our PVDF spraying coating processing apply the Kynar500 or Hylar5000 as the basic material, or metal aluminum powder as pigment coating.The stability of the fluorocarbon coating and durability is 30 and 80 percentage points higher than the other normal powder coating.
1. Material: Aluminum alloy 6063 T5
2. Temper: T5 | Alloy | Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | Impurity | Al |
| 6063 | 0.2-0.6 | 0.35 | 0.1 | 0.1 | 0.45-0.9 | 0.1 | 0.1 | 0.1 | 0.15 | Rest |
| 6061 | 0.4-0.8 | 0.7 | 0.15-0.4 | 0.15 | 0.8-1.2 | 0.04-0.35 | 0.25 | 0.15 | 0.15 | Rest |
| 6060 | 0.3-0.6 | 0.1-0.3 | 0.1 | 0.1 | 0.35-0.6 | - | 0.15 | 0.1 | 0.15 | Rest |
| 6005 | 0.6-0.9 | 0.35 | 0.1 | 0.1 | 0.40-0.6 | 0.1 | 0.1 | 0.1 | 0.15 | Rest |
4. Profile Width: max 400mm
5. Profile thickness: 0.8mm/1mm/1.2mm/1.4mm/1.6/2mm,and per request
6. Advantage
A High wearing resistance
B. good impact resistance
C. Good fade resistance under hostile environment weather
D. Comply with AAMA605.02.90, BS6496, AS3715-1989, SABS
7. Application
Window and door section, curtain wall profile, industrial profile | Alloy | Temper | Tensile strength test | Hardness test |
| Thickness(mm) | Tensile strength RM(N/mm2) | Non-proportional stretching stress Rp0.2(N/mm2) | Stretching rate A50mm(%) | Pattern thickness(m) | HV | HW |
| 6061 | T4 | All | >=180 | >=110 | >=16 | - | - | - |
| T6 | All | >=265 | >=245 | >=8 | - | - | - |
| 6063 | T5 | All | >=160 | >=110 | >=8 | >=0.8 | >=58 | >=8 |
| T6 | All | >=205 | >=180 | >=8 | - | - | - |
| 6063A | T5 | <=10 | >=200 | >=160 | >=5 | >=0.8 | >=65 | >=10 |
| >10 | >=190 | >=150 | >=5 |
| T6 | <=10 | >=230 | >=190 | >=5 | - |
| >10 | >=220 | >=180 | >=4 |
Yonglijian Aluminum Co.,Ltd processes 30 years in designing ,production ,and exporting of aluminum die casting product for architectures including window ,door and glass wall system, stair handrail, garden fence, housing decoration supples.etc.
We own more than 20,000 die mold for different markets in different thickness and designs. Including aluminum molds for Nigeria, Canada, Australia, South America, chille, etc and never stop developing new die mold for global aluminum profile buyers.
Find no further than us for Aluminum alloy profiles in any alloy and temper and surface treatments.
Product range:
Raw Material:
1. aluminum alloy profile for window /door/industrial use/decoration purpose
2. Aluminum blank, flat bar, square tube, round pipes, groove, T profiles.
3. Aluminum heat sink, and aluminum profile for electricity alliance
Finished products:
2. Aluminum window and door
3. Glass curtain wall
4. Stair handrail/fence
5. Roof lantern
6. Aluminum shutter and Louvre
April 16, 2024
