Aluminium Vacuum Cleaner Handle

Regular Aluminium Extrusion Bars and Tubes can be made into a vacuum cleaner handle through deep processing and other plastic accessories. Specific steps are as follows:

1. First, according to the design requirements of the vacuum cleaner handle, select a suitable aluminum tube as the main material. Aluminum tubes of different diameters and lengths can be selected as required.

2. Cut the aluminum tube to the desired length, using a saw or cutting machine to cut. Make sure the edges of the cut are flat.

3. Drill holes in the ends of the aluminum tubes for the plastic fittings. According to the size and shape of the plastic fittings, choose a suitable drill bit for drilling.

4. Connect the plastic fittings to the aluminum tubes. Glue, screws, or other attachment methods can be used for fixing. Make sure the connection is secure.

5. Check the fit of the vacuum cleaner handle. Make sure that the connection between the aluminum tube and the plastic fittings is tight and there is no looseness or air leakage.

6. Finally, apply surface preparation as desired. It can be painted, anodized, etc. to increase the aesthetics and durability of the handle.

Through the above steps, the aluminum tube round tube can be successfully deep-processed and matched with other plastic accessories to make a vacuum cleaner handle.